How to maintain Hydraulic Car Scrap Shear

1. Before each use, you should check whether the connection parts of the car crusher shear are firm, including the connection pins and bolts with the excavator arm, to ensure there is no loosening or damage.

2. Check the sharpness and wear condition of the blade. If the blade shows obvious wear,缺口 or dullness, it should be repaired or replaced in time.

3. Check whether the hydraulic pipeline is damaged or leaking, and whether the joints are tight. Any leakage of hydraulic oil may lead to a decline in the performance of the car crusher shear or even cause danger.

1. After each use, clean the debris, oil stains and metal scraps on the car crusher shear in time. A high-pressure water gun can be used for flushing, but be careful not to directly flush the hydraulic components and electrical system.

2. Regularly clean and perform anti-corrosion treatment on the surface of the car crusher shear to prevent rust and corrosion.

1. According to the requirements of the equipment manual, regularly lubricate the key parts of the car crusher shear, such as pins and joints. Use appropriate lubricating oil or grease to ensure sufficient but not excessive lubrication.

2. Note that before lubrication, clean the old lubricating oil and impurities first to ensure the lubrication effect.

1. Regularly check the oil level and quality of the hydraulic oil. If the oil level is too low, add qualified hydraulic oil in time. At the same time, observe the color, transparency and smell of the hydraulic oil. If any abnormality is found, replace the hydraulic oil in time.

2. Keep the hydraulic system clean and regularly replace the hydraulic oil filter element to prevent impurities from entering the system and damaging hydraulic components.

3. Check whether the pressure of the hydraulic system is normal. If there is any abnormality, adjust or repair it in time.

1. When the car crusher shear is not used for a long time, it should be stored in a dry and well-ventilated place, avoiding direct sunlight and rain.

2. A layer of antirust oil can be applied on the surface of the blade to prevent the blade from rusting.

3. Before storage, conduct comprehensive cleaning and maintenance on the car crusher shear to ensure it is in good condition.